SEATTLE

Categories: ,

$0.00

Width:30.0 ft.
Length:45.0 ft.
Area:1350 ft.


The Seattle is a PREMIUM model manufactured with 70mm (2-3/4) thick wall logs. Modifications can be made without cost providing no additional materials are required.  Home is 45' x 30' for a total of 1350 sq’.  This 3 or 4 bedroom home has a model roof design, 4' wide hallway and vaulted ceilings over 13' high.  Home is delivered to site and ready to assemble on a concrete slab or wood sub floor. 

This model can be insulated on the interior or exterior using metal brackets to mount 2×4 studs with 3/4" tongue & groove boards applied over the studs on the interior. If insulated on the exterior, a maintenance free siding or stucco can be applied. The solid wood of 2 3/4" thick has a thermal mass rating of R-12 ….. add R-15 insulation and achieve exceptional energy efficiency of R-27.   Insulating kit is 10% of selling price,  includes brackets & T&G cover boards

Tip: Mineral wool  insulation is recommended  for log construction.  It’s impervious to moisture with a higher R-value per inch than fiberglass and is considered a GREEN building material, environmentally friendly insulation

Tip: False dormers can be added to exterior roof to enhance the beauty of the home

The Seattle can be assembled in 13 days with 4 people and passes structural requirements for building codes. Modifications may be required for earthquake, heavy snow load regions and hurricane zones.  Approved structural engineered drawings available on request for a fee. 

Kit includes:

  • ready to mount on slab or wood sub floor
  • (70mm) 2 3/4" pre-cut numbered exterior walls
  • (70mm) 2 3/4" pre-cut numbered interior walls
  • vaulted ceilings
  • roof purlins
  • tongue & groove ceiling/roof boards
  • fascia trims
  • PREMIUM double glazed wood windows
  • entry doors c/w locks, deadbolts, keys
  • window & door trims
  • interior doors c/w hardware 
  • threaded steel storm rods at junctions